Fire Protection 
Flood Protection Watertight and gastight protection for building entries and cable duct terminations
A simple and long term solution designed for sealing cable ducts and building entries against ingress of water, gas or flooding. The system is used extensively across the utilities and construction sectors to protect electrical substations, equipment rooms and cabinets, wind turbines and critical infrastructure.
Benefits
• Provides flood protection and prevents gas ingress
• Fire rated version available certified to BS EN1366-3
• Quick and easy to install in both horizontal & vertical ducts
• Age tested to prove 50 years of sealing protection
• A cost effective Totex solution
• Easy re-entry for adding, removing or replacing cables
• Suitable for trefoil and large power cables and provides long term cable support
• Installed in any sized or shaped opening
• Prevents rodent ingress
• Resistant to submersion in Petrol and Diesel
• Resistant to Methane, Hydrogen Sulphide and Chlorine
• Ensures WIMES, APEA, ATEX & DSEAR compliance
Designed for empty or single service penetrations. Combines fast and simple installation with effective sealing performance against gas and water ingress. The system can be used for cables or metallic and plastic pipes.
Benefits
• Suitable for empty, single service or trefoil applications
• Can be used for all types of metallic and plastic pipes
• Can be installed within minutes
• Do not require bolting or any other mechanical fixing
• Low maintenance
• Can be exposed to high pressure loads directly after installation
• Tested under severe condition, suitable for wide ranging industries and for use in the harshest environments.
Fire protection in accordance with BS EN1366-3 for cable and pipe penetrations
An effective and simple solution for penetrating fire rated walls and floors. The system can be used for cables, metallic pipes, plastic pipes or even a mixture of all 3 service types.
Benefits
• Fire tested in accordance with BS EN1366-3
• Quick and easy to install in both wall and floor penetrations
• Age tested to prove 50 years of sealing protection
• A cost effective Totex solution
• Easy re-entry for adding, removing or replacing services
• Suitable for trefoil and large power cables and provides long term cable support
• No frame required and can be installed in any sized or shaped opening
• Certified to provide up to 4 hours of fire protection
• Space saving & allows for highly filled cabled transits
• Resistant to Methane, Hydrogen Sulphide and Chlorine
•Water and gas tight protection
• Cables and pipes can pass through openings off-centre or angled
• Ensures WIMES, ATEX & DSEAR compliance
%20-%20Copy_1.JPG){kind=spacer}
_1.jpg)
Designed for fireproof ducting of cables in buildings and industrial applications. The system combines flexibility and simplicity with outstanding fire protection. Closed cell foam rubber sheets can be sized to suit any sized cable or pipe passing through any sized opening.
Benefits
• High level of fire resistance
• Thermal protection
• Long term protection against fire and heat
• Low surface temperature
• Remains mechanically intact
• Non fibrous
• Age tested in excess of 50 years
• Lowest smoke and toxicity material
• Ducting of addtional cables extremely simple
• Low maintenance costs
• Aesthetic finish
Used for oversized wall and floor openings with ducted cables passing through. The combination of NOFIRNO Sealant and NOFIRNO coated mineral wool boards have been developed to provide a cost effective solution. During a fire the NOFIRNO coating forms a ceramic protective shield creating a thermal barrier it will also prevent moisture from escaping from the mineral wool board.
Benefits
• Simple solution for oversized conduits
• Easy access for extensions
• Optimized fire and smoke barrier
• High thermal insulation properties
• Suitable for use externally or in damp environments
Testing Standards
• Smoke Tight (when used with NOFIRNO Sealant)
• TNO Laboratory - Age Testing to 50 years
• EN1366-3 European Fire Test - 2 hours fire protection
• NES711 - Low Smoke Index
• NES713 - Low Toxicity Indec
• ISO4589-3 - High Temperature Index
• ISO4589-2 - High Oxygen Index
Designed for empty or single service penetrations passing through fire rated boundaries. Combines fast and simple installation with effective sealing performance against fire, gas and water ingress. The system can be used for cables or metallic and plastic pipes.
Benefits
• Allows the shortest possible conduit length for fire rated penetrations
• Can be used for all types of metallic and plastic pipes
• Can be installed within minutes
• Do not require bolting or any other mechanical fixing
• Low maintenance
• Can be exposed to high pressure loads directly after installation
• Tested under severe condition, suitable for wide ranging industries and for use in the harshest environments.
Watertight and gastight protection for building entries and cable duct terminations
The original simple and long-term solution designed for sealing cable ducts and building entries against ingress of water, gas or flooding. The system is still used extensively across the utilities and construction sectors and uses our individual RISE split insert sleeves rather than the innovative NOFIRNO multi sleeves used in the NOFIRNO duct seal system.
• Provides flood protection and prevents gas ingress
• Quick and easy to install in both horizontal & vertical ducts
• Age tested to prove 50 years of sealing protection
• A cost effective Totex solution
• Easy re-entry for adding, removing or replacing cables
• Suitable for trefoil and large power cables and provides long term cable support
• Installed in any sized or shaped opening
• Prevents rodent ingress
• Resistant to submersion in Petrol and Diesel
• Resistant to Methane, Hydrogen Sulphide and Chlorine
• Ensures WIMES, APEA, ATEX & DSEAR compliance
For use with NOFIRNO & RISE Duct Sealing Systems in running water applications.
It is essential when installing the RISE and NOFIRNO duct seal systems that the ducts or building entries are dry and that the water pressure does not build up behind the seal which could cause failure during the curing of the sealant layer. Using the adapted SLIPSIL technology to include a drain assembly allowing for installation of our duct seal system in certain wet conditions.
