Welcome to CSD Sealing Systems
Newsletter Signup:
Interested in finding out the latest news from CSD? Signup to our e-newsletter group and we will email you the latest news direct to your inbox.
CSD Sealing Systems Ltd.
Unit 6, Easter Park, Nelson Park West, Cramlington NE23 1WQ
T: +44 (0)1670 353 300
F: +44 (0)1670 369 503
Company Registration Number:
01912236698
Slipsil Sealing Plugs INTRODUCTION:
Slipsil Sealing Plugs combine simple installation with effective sealing performance. Designed to seal pipes and cables against the ingress of gas and water at pressures in excess of 2.5 BAR and fire for up to 4 hours, in a range of sizes to suit services between 5mm and 520mm in diameter.
Slipsil Sealing Plugs
Slipsil Sealing Plugs are for cables and metallic and plastic pipes. The plugs are watertight, gastight and fire-safe giving plenty of protection when necessary.
Features
CSD Sealing Plugs consist of 2 equal parts that allows them to be inserted after all pipes or cables in a conduit are installed.
The flange of the sealing plug is designed in a way that even after installation they are easily recognisable. The plugs have a special profiling, the serrated profiles at the outside have an interspacing and are levelled and the inner ribs are flattened and interconnected.
Benefits
- Allows the shortest possible conduit length for fire rated penetrations
- Can be used for all types of metallic and plastic pipes
- Can be installed within minutes
- Do not require bolting or any other mechanical outfitting
- Low maintenance
- Can be exposed to fairly high pressure loads directly after installation
- Tested under the worst conditions.
Testing Standards
Slipsil sealing plugs have gone through three pressure tests at nominal dimensions to determine the pressure ratings for plugs with smallest, medium and largest inlets.
The plugs also have been subjected to three pressure tests with the minimum pipe diameter and the widest conduit opening to determine tightness and extreme tolerances. This procedure has to be repeated with the smallest conduit opening and the largest pipe diameter to determine ease of installation. Finally, the largest pipe diameter has to be tested in the widest conduit opening to determine tightness in another extreme condition.
This creates a total of twelve pressure tests for each series to determine the operational tolerances and ease of installation.
- Lloyds Register witnessed – 2.5 Bar pressure test
- TNO Laboratory – Age Testing to 50 years
- IMO A.754(18) - A60 and H120 approved
- NES711 - Low Smoke Index
- NES713 - Low Toxicity Index
- ISO4589-3 - High Temperature Index
- ISO4589-2 - High Oxygen Index.